Ubiquiti PBE-M2-400 Dubai

Ubiquiti PBE-M2-400 PowerBeam airMAX Bridge Dubai

The Ubiquiti-M2-400 PowerBeam airMAX Bridge Dubai features a compact and innovative mechanical design which is primed to achieve the focal point of any room. It not only supports up to 150+ Mb/s real TCP/IP throughput, but can also direct RF energy in a tighter beamwidth. The PBE-M2-400 focuses in one direction so as to block and spatially filter out background noise, thus enhancing noise immunity. This feature is specifically important in crowded areas where other RF signals of the same or similar frequency are available.

Description

Ubiquiti PBE-M2-400 PowerBeam airMAX Bridge Dubai

The PBE-M2-400 PowerBeam airMAX Bridge from Ubiquiti Networks has an innovative mechanical design. This PowerBeam supports up to 150+ Mb/s real TCP/IP throughput. It directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is important in an area that is crowded with other RF signals of the same or similar frequency.

Ubiquiti’s InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing increased performance from its fast processor the PowerBeam is versatile and cost-effective to deploy.

airMAX Technology

Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots, scheduled by an intelligent AP controller. Slot method eliminates hidden node collisions and maximizes airtime efficiency. It provides significant performance improvements in latency, throughput, and scalability compared to all other outdoor systems in its class.
Intelligent QoS: Priority is given to voice/video for seamless streaming.
Scalability: High capacity and scalability.
Long Distance: Capable of high-speed, carrier-class links.

PBE-M2-400 PowerBeam airMAX Bridge Features:

Software Features

airOS
- airOS is a versatile Ubiquiti firmware technology. It is an intuitive technology and requires no training to operate. Behind the user interface is a powerful firmware architecture, which enables high-performance, outdoor multi-point networking. PowerBeam uses airOS 5, which provides additional advantages, including airMAX protocol support, automatic channel selection, dynamic configuration changes, instant input validation, use of HTML5 technology, and optimization for mobile devices.
airView
- Integrated airView provides advanced spectrum analyzer functionality such as waterfall, waveform. Real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference. Waterfall aggregates energy over time for each frequency. Waveform aggregates energy collected. The real-time feature shows energy in real-time as a function of frequency. Recording automates airView to record and report results.
airControl
- airControl is a powerful and intuitive, web-based server network management application, which allows operators to centrally manage entire networks of Ubiquiti devices. It features network map, monitor device status, mass firmware upgrade, Web UI access, manage groups of devices, and task scheduling.

Hardware Features

Built-In Mechanical Tilt
- The mounting bracket conveniently offers 20° of up-tilt and up to 20° of down-tilt.
Quick Assembly
- The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the PowerBeam on the pole.
Easy Removal
- The antenna feed can be detached with the push of a button.
Fasteners
- GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners.
Dish and Brackets
- Made of galvanized steel, powder-coated for superior corrosion resistance. Redesigned pole bracket for the 19.7″ and 15.7″ dish and fender washers for the 11.8″ dish prevent paint from being removed from the metal brackets, for improved corrosion resistance.

PBE-M2-400 PowerBeam – General Specifications

Processor	Atheros MIPS 74Kc, 560 MHz
Memory	64 MB DDR2, 8 MB flash
Networking Interface	1 x 10/100 Ethernet port

Power

Power Supply	24 V, 0.5 A PoE adapter
Power Method	Passive PoE (pairs 4, 5+, 7, 8 return)
Maximum Power Consumption	6 W

Antenna

Gain	18 dBi
VSWR	1.5:1 (maximum)
Built-In Mechanical Downtilt	+20° to -10°
Polarization	Dual linear
Operating Frequency	2405 – 2475 MHz
Wind Loading	342.5 N @ 200 km/hour (77 lbf @ 125 mph)
Wind Survivability	200 km/hour (125 mph)

LED Indicator Specifications

LEDs	1 x Power 1 x LAN 4 x WLAN
Signal Strength LEDs	Software-adjustable to correspond to custom RSSI levels

Channel Size Support

Channel Sizes

5/8/10/20/30/40 MHz

Tests

Salt Fog Test	IEC 68-2-11 (ASTM B117) Equivalent: MIL-STD-810 G method 509.5
Vibration Test	IEC 68-2-6
Temperature Shock Test	IEC 68-2-14
UV Test	IEC 68-2-5 at 104°F (40°C) Equivalent: ETS 300 019-1-4
Wind-Driven Rain Test	ETS 300 019-1-4 Equivalent: MIL-STD-810 G method 506.5